RMB-36DA EXTENDED HORIZONTAL BALER
The RMB-36DA Extended Horizontal Baler is designed to produce a bale approximately 900 x 800 x 1400 in size with a weight of 400-600 kg's (depending on material) and handle approximately 400-800 tons per month. The RMB-36DA Extended is designed to be manually loaded, tied and discharged.
Special variable flow, high performance piston pump with constant horsepower controller and regen valve as standard.
Platen guided at rear and fitted with four heavy duty platen rollers.
Chamber floor bottom and side wear plates Quard450 hard wearing, abrasion resistant material.
Typically conveyor fed. Safety hand feed hopper shown above.
SPECIFICATION
|
Series |
RMB-36DA EXT |
|
Type |
Horizontal – Top Loading |
|
Charge Chamber opening size |
1400 x 810mm |
|
Bale size |
900 x 800 x 1400mm Variable |
|
Bale weight / mass |
440 to 600kg (Dependent upon product) |
|
Number of bale ties |
4 |
|
Bale Ejection |
Automatic |
|
Cycle time |
Automatic - 16 seconds (No Load) |
|
Ram Thrust |
58 Tons |
|
Normal Working Pressure |
230 bar |
|
Pump Type |
Piston pump with pressure, flow & torque compensation |
|
Rated Output |
160 - 360 Tons per month |
|
Pump Size |
140cc/rev, 205 l/min |
|
Motor Size |
30KW |
|
Cylinder Specifications (Bore x Rod x Stroke) |
180 x 100 x 2700mm |
|
Hydraulic Oil Cooler |
Standard |
|
Oil Tank Capacity |
640 Litres |
|
Shipping Weight |
Approx. 7200 kg |
|
Electrical |
|
|
Electrical Supply Requirements |
380V 3 Phase 4 Pole 50 Hz |
|
Power Point |
5 Pin Plug & Socket 32 amp |
|
Dimensions |
|
|
L - Length |
6155 mm |
|
W - Width ( Including the Chute) |
1386 mm |
|
H - Height ( Including the Chute) |
2250 mm |
|
Country of Origin |
Manufactured in South Africa |
All specifications are for indicative purposes only and subject to change without prior notice