| Recyquip Products Horizontal Balers

RMB-15D HORIZONTAL BALER


The RMB-15D Horizontal Baler is designed to produce a bale approximately 700 x 700 x variable in size with a weight of 110-200 kg's (depending on material) and handle approximately 50-75 tons per month. The RMB-15D is designed to be manually loaded, tied and discharged.

RHB-20-D Baler Spec

RMB-28DA HORIZONTAL BALER


The RMB-28DA Horizontal Baler is designed to produce a bale approximately 900 x 800 x 1400 in size with a weight of 300-550 kg's (depending on material) and handle approximately 300-400 tons per month. The RMB-28DA is designed to be manually loaded, tied and discharged.

Baler fitted with a variable displacement piston pump and controller as standard.
Wear plates on side, floor and roof of baling chamber
Platen fitted with four rollers and guides
Platen and chamber block fitted with a cutting blade and cutting edge.

RMB-36DA HORIZONTAL BALER


The RMB-36DA Horizontal Baler is designed to produce a bale approximately 900 x 800 x 1400 in size with a weight of 400-600 kg's (depending on material) and handle approximately 400-800 tons per month. The RMB-36DA is designed to be manually loaded, tied and discharged.

Special variable flow, high performance piston pump with constant horsepower controller.
Platen guided at rear and fitted with four heavy duty platen rollers.
Chamber floor bottom and side wear plates.
Typically conveyor fed. Safety hand feed hopper shown above.

 

RMB-28D

RMB-28D HORIZONTAL BALER


The RMB-28D Horizontal Baler is designed to produce a bale approximately 900 x 800 x 1400 in size with a weight of 300-450 kg's (depending on material) and handle approximately 300-400 tons per month (24 hours per day). The RMB-28D is designed to be manually loaded, tied and discharged.

Baler is fitted with duel gear pumps, manual lever valve and hydraulic oil cooler as standard.
Wear plates on side, floor and roof of baling chamber
Platen fitted with four rollers and guides
Platen and chamber block fitted with a cutting blade and cutting edge.

RMB-36DA EXTENDED HORIZONTAL BALER


The RMB-36DA Extended Horizontal Baler is designed to produce a bale approximately 900 x 800 x 1400 in size with a weight of 400-600 kg's (depending on material) and handle approximately 400-800 tons per month. The RMB-36DA Extended is designed to be manually loaded, tied and discharged.

Special variable flow, high performance piston pump with constant horsepower controller and regen valve as standard.
Platen guided at rear and fitted with four heavy duty platen rollers.
Chamber floor bottom and side wear plates Quard450 hard wearing, abrasion resistant material.
Typically conveyor fed. Safety hand feed hopper shown above.